How To Provide Sustainability And Green Energy Technology In Smart Hotel Room? – Stop By Our Site ASAP To Find Out Extra Suggestions..

High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests are more inclined to return for an additional stay when they can customize their room to match their preferences. However, providing these functions using old technology wastes a lot of energy. For instance, there are plenty of difficulties with the old card key switches. Guests can put any card in the old switches, or they might ask for more than one card. Even when hotel desk refuses to offer more than one card to a guest, she/he may claim to have lost the credit card.

How to save energy in hotel without using card switch?

The traditional old technology of hotel card switch. Additionally there is a great deal of over usage of lights and AC energy due to things running even if guests aren’t in their rooms, and this can cause a financial loss for the owner. Needless to say, no hotel owner desires to prohibit guests from using a comfortable stay, nor do owners expect guests to get into a dark or cold hotel room. Nobody is to blame. Both guests and hotel owners have the right to fulfill their interests.

Some hotel owners think should they separate the AC from your main network, less energy will be consumed, while others believe that motion sensors are definitely the solution. However, these approaches forget to resolve the situation. The AC is the most energy-consuming device of, and motion sensors could be nightmares because they only function based upon movement detection, which means the AC and lights might go off while a guest is sleeping or reading a magazine. Nightmarish!

The TIS Automation Company provides the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has several options, such as a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.

TIS Energy servant, the newest way for hotel energy saving technology. By installing this door sensor on the entrance to your room, connecting it for the Energy Servant’s digital input, and programming the logic lines, the problem of room occupancy is completely resolved.

The following logics may be defined for this sensor to handle room energy without any discomfort for guests:

Logic 1: When there is any movement in the room, the occupancy mode will be on.

Logic 2: When the main door is opened and closed, a flag will switch on for one minute to check if there exists movement in room. If no movement is detected after one minute, the program will activate energy-saving mode. This can be beneficial in situations each time a guest enters the area briefly. In energy-saving mode all lights are off with the exception of a nightlight, which stays on for 3 hours in the event there is another guest having a nap. Also, the AC is definitely not switched off, however its temperature will likely be decreased by 2 degrees. This can help save energy with time.

Logic 3: In the event the energy-saving mode is enabled without any movement is detected for more than 3-5 hours, the nightlight and AC will likely be turned off automatically. It is also possible to define lower temperature levels for the AC. Furthermore, the power Servant can turn the AC on/off if this recognizes that a balcony window/door is open. All of this requires is adding a magnetic contact connected to the balcony window/door and programming the preferred smart decision. The sunshine harvest sensor helps save energy by wscgid balcony lights off if you have enough sunlight.

Another practical and beneficial ability of this sensor is its built-in thermostat, which helps retain the right temperature at all times. This is very important to keep furniture fresh and intact. Also, in hot spots and whether or not the room is empty for some time, humidity and bad smells is not going to turn into a problem within the room. This sensor can be programmed to alter AC to dry mode when the room temperature reaches or exceeds 28-30C degree. This can happen many times in the daytime if needed. A comparable performance could be programmed in cold spots to stop mold.

Another choice of this smart system is TV control. When the hotel supplies the guest using a room tablet, she/he is able to control the room’s TV with it. This sensor was set up in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious stay at this hotel.

TIS offers the opportunity to meet both hotel owners and guests interests and needs with just a couple items as well as in the most power efficient possible way. To learn more or to schedule a consultation, contact us at www.tiscontrol.com